Maintenance list.

So to give people an idea of how often I do maintenance on my rifles. And what I do and when i do it.
Here is a list (ongoing) of what I did and when I did it.

*Note this is still work in progress.

Continue reading


VSR-10 maintenance and tuning.

Okay it’s time for some maintenance for my VSR-10 after the big game in Denmark.
And no there will not be any posts about that game as the VSR was feeling like hitting anything.
ANd the fact that I was forced to use dark bbs, thereby making it impossible to compensate for wind. Did not help on the matter.

Any how.
I had 4 things I needed to fix.
1. I was shooting thread tape at some points so I need to check that.
2. It got a bang and the outer barrel got knocked loose.
3. The cylinder needs some new lubrication.
4. I need to check the hop-up rubber to see how it’s doing as I put in a new one before I went down to Denmark.

Continue reading

Grinding down the bridge on a barrel.

So I have seen a lot of people asking about this before.
And I wanted to try a tight bore barrel and a short barrel on the VSR, so I figured out I might as well use the stock barrel the VSR came with.
now the specs on the barrel I got was. (Turns out they have a tendency to change the barrel on the different batches so yours might be different).
303mm Long.
6.1mm ID.
Bridged hop-up window.

Continue reading